European energy trading is the buying and selling of electricity and gas across Europe's linked markets. Most countries trade power through one shared auction the day before delivery. That auction sets a price for every area at once and decides how much power crosses each border. Gas is traded at a set of national hubs, with the Dutch hub, TTF, as the price everyone else is measured against.

This article is for anyone joining a power or gas desk on the Continent: in Madrid, Zurich, Amsterdam or Düsseldorf. It is also for readers who know the British market and want to see how the rest of Europe differs. For how one market works from the inside, start with how power trading works and how gas trading works. Both follow Great Britain. This article zooms out to the whole Continent.

One market, many prices

Europe does not have one electricity price. It has one price per bidding zone. A bidding zone is an area inside which power can move freely, so everyone in it pays the same wholesale price. Most zones are whole countries. France is one zone, and so are Spain, Portugal and the Netherlands. Germany and Luxembourg share one.

Some countries are split, because their grids have bottlenecks inside them. Norway has five zones, Sweden four and Denmark two. Italy has seven, from the North down to Sicily and Sardinia. Splitting Germany's zone into several was studied. In December 2025 its economy ministry decided to keep one zone; the debate at EU level goes on.

The borders between zones are where prices split. Inside a zone, the grid is assumed to carry whatever is traded. Between zones, the cables and lines have a limit. When that limit is reached, the two sides can end up with very different prices. Most of this article is about what happens at those borders.

Where power is traded

Power is bought and sold in two places. Exchanges run the auctions and the screens where traders post orders. Over the counter (OTC), two companies agree a trade directly, often through a broker. Exchanges dominate trading for the next day and the same day. Further ahead, for months, quarters and years, more is traded OTC and on futures exchanges.

Market Day-ahead and intraday exchanges Futures for months and years ahead
Germany, France, Netherlands, Belgium, Austria EPEX SPOT, with Nord Pool also active EEX
Nordic and Baltic countries Nord Pool, with EPEX SPOT in the Baltics Euronext (since March 2026)
Spain and Portugal OMIE, the Iberian exchange EEX, among others
Italy GME, the Italian exchange EEX

The exchanges that run the day-ahead and intraday markets are called NEMOs (nominated electricity market operators). Several can work in the same zone. A German trader can send orders through EPEX SPOT or Nord Pool and still take part in the same auction.

The shared day-ahead auction

Every day at noon, Central European Time, the order books close for tomorrow's power. This is the day-ahead auction, and most of Europe runs it as one. Its official name is Single Day-Ahead Coupling (SDAC). The countries in it are "coupled": their auctions are solved together, as if they were one.

Here is what happens.

  1. Before noon, every buyer and seller sends orders to its exchange. An order says how much power, for which period, at what price. A gas plant offers to sell above its fuel cost. A supplier bids to buy what its customers will use.
  2. The grid operators send in the limits on every border: how much power can cross, in each direction, for each period.
  3. At 12:00 the books close. One algorithm, called Euphemia, takes all the orders from every zone and every exchange together.
  4. Euphemia finds the prices and the cross-border flows that give the most value from trade, without breaking any border limit. Power flows from cheap zones to dear ones until either the prices meet or the border is full.
  5. Results are published at around 12:45. Every zone gets a price for each period of the next day, and every accepted order is a firm trade.

Since delivery on 1 October 2025 the auction trades in 15-minute periods, so each day has 96 prices per zone instead of 24. Prices can range from minus €600 to plus €4,000 per megawatt-hour (MWh). The floor was minus €500 until May 2026; the rules move these limits out when prices come close to them.

A negative price means sellers pay to deliver. It happens on sunny, windy days, when output that cannot easily stop exceeds demand.

When the border fills up: a worked example

Spain and France show what coupling does, and where it stops. Spain has a great deal of solar power. France has a large fleet of nuclear plants. Between them run lines across the Pyrenees, with room for about 2,800 megawatts (MW) of trade. That is small next to the size of either market.

The French energy regulator, CRE, counted how often the two prices matched in 2025. They were equal about a third of the time. France was cheaper 36% of the time, and Spain the rest of the time. When they are equal, the border had spare room. When they differ, the border was full.

Take one quarter-hour, 13:00 to 13:15 on a sunny Tuesday in April. The numbers are made up, but the pattern is typical.

Without the border. Spanish solar floods its market. On its own, Spain would clear at €5/MWh. France, on its own, would clear at €48/MWh, with some gas plants running.

With the border. Euphemia sees the gap and sends power from Spain to France. Each extra megawatt sold north raises the Spanish price a little and lowers the French one. Suppose the grid operators have made 2,500 MW available for trade in that quarter-hour. The flow reaches 2,500 MW before the prices meet. The border is full, and the auction stops there:

Spain France
Price, 13:00 to 13:15 €9/MWh €44/MWh
Flow across the border 2,500 MW out 2,500 MW in

Spain's price rose from €5 to €9, because its power now has somewhere to go. France's fell from €48 to €44, because cheaper power came in. The gap that is left, €35/MWh, is the price of the full border.

Who gets the gap. In a quarter-hour, 2,500 MW delivers 625 MWh (2,500 × 0.25 hours). French buyers pay €44 for each of those megawatt-hours. Spanish sellers receive €9. The difference, 625 × €35 = €21,875, is called congestion income. It goes to the grid operators that run the border, not to any trader. EU rules say it should go first on keeping and adding border capacity.

What a trader can hold. Traders can buy a share of the border in advance, as a long-term transmission right. On the Spain-France border these are physical transmission rights (PTRs), sold in yearly and monthly auctions on JAO, the platform that sells Europe's border capacity. A PTR gives its holder the right to send a fixed amount of power across, in one direction, in every period.

Say a trader holds a 100 MW right from Spain to France for the whole year. In our quarter-hour it has two choices.

  • Use it. Buy 25 MWh in Spain at €9, send it across and sell it in France at €44. That earns 25 × €35 = €875.
  • Leave it. If the trader does not schedule the power, the rule called use-it-or-sell-it sells the unused right back into the auction. The trader is paid the price gap for it: the same €875.

Either way, the right pays the gap between the two zones. That is why traders buy them. A trader who buys power in Spain to supply a customer in France is exposed to that gap. A right from Spain to France pays it back when the border is full, and pays nothing when the prices are equal. It works like insurance against the border filling up.

The gap will narrow, but not close. A new cable under the Bay of Biscay is being laid now, and is due in 2028. It will take the border from about 2,800 MW to 5,000 MW.

How much power can cross a border

In the example, the grid operators said how much power could cross. How they work that out differs across Europe.

The older way is a fixed number per border, agreed in advance. It is called net transfer capacity (NTC). The border between Spain and France still uses it, set jointly by the two grid operators.

Much of central Europe uses flow-based coupling instead. Power does not follow the route on the contract. It spreads across every line in the meshed grid, by the laws of physics. A sale from France to Germany can load lines in Belgium and the Netherlands on the way. Flow-based coupling models those flows. The algorithm can then pick the mix of trades the grid as a whole can carry, rather than respecting one fixed number per border.

Flow-based coupling started in the Core region (from France and the Benelux countries east to Poland and Romania) on 8 June 2022. The Nordic countries followed on 29 October 2024. For a trader, it means more power can cross on most days. It also means a border's capacity is harder to forecast, because it depends on what is happening across the whole grid.

Intraday: trading after the auction

The day-ahead auction fixes positions for tomorrow. Forecasts then keep changing. The wind drops, a power station trips, a cloud bank arrives. Desks correct their positions in the intraday market, which runs from the afternoon before delivery until shortly before each period starts.

Europe's intraday market is also shared, under the name Single Intraday Coupling (SIDC). It has two parts.

  • Continuous trading. Traders post orders on a screen, and a trade happens whenever a buy and a sell match. Since 2018 orders can match across borders, using whatever border capacity is left after the day-ahead auction. Most periods trade as 15-minute products.
  • Intraday auctions. Since June 2024, three auctions a day sell the remaining capacity at a single price, as the day-ahead auction does. They close at 15:00 and 22:00 the day before, for the whole next day, and at 10:00 on the day, for its second half.

Cross-border continuous trading stops shortly before delivery. From 2026 the EU rule is 30 minutes before, and the first borders moved in January 2026. Many borders, including all of France's, keep 60 minutes until 2029 at the latest. Inside a zone, trading can run closer to delivery, on each exchange's own rules.

After delivery comes the bill for any gap. Each company that trades power is responsible for its own balance. Grid operators charge an imbalance price for any shortfall or surplus. How that price is worked out differs from country to country.

Switzerland: in the middle, outside the auction

Switzerland sits at the centre of Europe's grid, with lines to France, Germany, Austria and Italy. Yet it takes no part in the shared auctions. EU rules allow Swiss participation only under an electricity agreement between Switzerland and the EU. So on every Swiss border, capacity for the day ahead and beyond is sold separately, in explicit auctions on JAO, before the energy is traded. A trader who wants to move power into Switzerland must win the capacity first, then buy the power. Prices can move in between.

That may change. Switzerland and the EU signed an electricity agreement on 2 March 2026. It is not yet in force: the Swiss parliament is debating it, and a popular vote is expected in 2028. Under the agreement, Switzerland would join the shared auctions within nine months of it coming into force.

Gas: hubs and the TTF benchmark

Gas is traded differently. Each country, or group of countries, is one entry-exit zone. Gas enters the zone from pipelines, terminals or storage, and leaves it to customers or the next country. Inside the zone, gas changes hands at a virtual trading point, or hub. The hub is not a place. It is an account in the grid operator's books, where one company's gas becomes another's.

Hub Country Run by
TTF (Title Transfer Facility) Netherlands Gasunie Transport Services
THE (Trading Hub Europe) Germany, one zone since October 2021 Trading Hub Europe
PEG (Point d'Échange de Gaz) France, one zone since November 2018 GRTgaz and Teréga
PVB (Punto Virtual de Balance) Spain Enagás; exchange trading on MIBGAS
PSV (Punto di Scambio Virtuale) Italy Snam
ZTP Belgium Fluxys
CEGH VTP Austria Central European Gas Hub

TTF is Europe's benchmark. It has the most trading, and the EU regulator, ACER, measures other hubs against it. A trader quotes French or German gas as "TTF plus" or "TTF minus" a spread. TTF futures trade on ICE Endex.

The European gas day runs from 06:00 to 06:00 Central European Time, which is 05:00 to 05:00 in the UK. Deliveries, nominations and balancing all follow it. Storage shapes the winter price. EU rules, which now run to the end of 2027, set the target. Each country's storage must be 90% full at some point between 1 October and 1 December. It may fall short by up to 10 percentage points when the market makes filling difficult.

As in power, spreads between hubs reflect the cost and room on the pipes between them. When a pipeline is full, the two hubs can drift apart. The global gas market works through one such spread, between TTF and Britain's NBP.

The rules every desk works under

The EU's market abuse rules for energy are called REMIT. They ban insider trading and market manipulation in wholesale power and gas. Traders must publish inside information, such as a plant outage, promptly, and must not trade on it first. They must register with their national regulator and report their trades to ACER. A revised REMIT came into force in May 2024. What changes in REMIT reporting and REMIT for algorithmic trading cover what it asks of a desk.

How Great Britain differs

Great Britain left the shared auctions when it left the EU's energy market, at the start of 2021. Its own day-ahead auctions run alone, in hourly and half-hourly periods, not quarter-hours. Capacity on most of the cables to the Continent is sold in separate auctions before the European auction runs. A trader must win the cable first, then trade the power on each side. What Britain loses without coupling measures what that costs.

The UK and the EU agreed in December 2025 to negotiate Britain's return to the EU electricity market. The EU's ministers authorised the talks on 30 March 2026. Nothing had been agreed as of 19 November 2026. A UK-EU summit was due in Brussels on 20 November 2026.

British gas trades at its own hub, the NBP. Its gas day is the same instant as the Continent's: 05:00 to 05:00 UK time. How gas trading works follows one British gas day.

What a European desk's systems have to do

A desk trading across Europe deals with many zones, several exchanges and 96 periods a day. No one does it by hand. Its software has to:

  • hold a position for every zone and every quarter-hour, and know which border rights sit behind it;
  • send orders to each exchange in its own format, before each auction's deadline, and read back the results;
  • track border rights from the yearly and monthly auctions, and decide each day whether to use them;
  • trade on the continuous intraday market, where cross-border gate closure is 30 minutes before delivery on some borders and 60 on others;
  • handle clock changes, when a day has 92 or 100 quarter-hours;
  • report every trade under REMIT, on time.

Each of these has its own deadline, often in a different time zone from the desk. What is an ETRM system? covers the system of record these tools sit around.

Building or replacing this on your own desk? It is the work A115 does. See the systems work

What the full guide adds

This article is the short version. In the library, the full guide on these markets runs across three guides, at the depth a desk works at:

  • Day-ahead and Intraday: an auction cleared by hand and the order types beyond a simple limit. It shows how the order book thins out before gate closure, and how Germany sets its imbalance price;
  • Interconnectors and Carbon: capacity sold separately against capacity sold inside the auction, with numbers. It covers Euphemia, flow-based coupling in detail, and how carbon prices change which plants run;
  • Cross-Border Capacity Trading and FTRs: a JAO auction walked through, and physical rights against financial ones. It covers the risks a border right does not, and values a right in Python.

The full guide is in the community on Skool, with the rest of the series, and it is updated regularly as the markets change. If you want to work on a trading desk, read it to understand the subject properly. To join, start at the Energy Trading Fundamentals course page.

Sources